Water Based Magnetic Paint
Water Based Magnetic Paint Wall Paint Transforms Johor Bahru JB Malaysia Supplier & Supply | I Education Solution
RM 110.00
Quantity
paint mag

Water Based Magnetic Paint (Make In Taiwan) 30sgf 

Magnetic Paint, Fun with Magnetism in modern life. Great for craft projects, children’s room, message board and more.

Surface Preparation
Make sure surface to be painted are sound, clean, dry. Remove any loose, defective paint or powdery residue. Repair crack, uneven surfaces with suitable filler. Smoothen the filler areas with sandpaper. Clean the area thoroughly to make sure the area is free from dirt, grease, oil, mildew and dusty residue. Avoid painting when the moisture content or dampness of the wall is above 15%. Prime bare wood or newly plastered surface with suitable primer. Sand textured or rough surfaces to a smooth, level area. Remove any dust before painting.

Instruction
Stir Paint thoroughly for at least 10 minutes, scraping bottom of the can while stirring. Stir to a smooth and lump free, even dark grey color. Rainbow Magnetic Paint comes ready to use, dilute with a maximum of 5% water if required. Stir regularly during application. Theoretical Coverage of Rainbow Magnetic Paint is around 3M2 per Liter for 3 coat, use up all the paint in the can for the area designated.

Application
Application Method: Polyester Brush / High Density Foam Roller / Conventional Spray or Airless Spray
For DIY Users, we recommend to apply using high density foam roller, also known as dense foam paint roller. Apply smoothly and allow to hard dry for a minimum of 4 hours before applying the next coat. Sand the Magnetic Paint surface with sand paper (suggest 240 or 100 sand paper depends on the condition) to smoothen and create a level surface. Reapply the next coat smoothly and sand when hard dry. We recommend to apply at least three coats of Rainbow Magnetic Paint. Use roller tray or paint pan to prevent under-loading or over-loading of roller. We suggest interval application of the coating in vertical, then horizontal direction to reduce streak, drips and lap marks. Repeat the application direction when more coat is required. Test on the Magnetic attraction when complete. The thickness of the Magnetic coat affect the magnetic attraction directly. Let it dry for at least 24 hours beforecovering it with a topcoat (drying times differ due to humidity and room temperature). 

Top Coat
Rainbow Magnetic Paint can be match with Rainbow Paint 450, 860 and Caspro Water-Based Emulsion
Paint or other suitable Latex paint or Emulsion Paint. It can also be matched with Rainbow Paint
Water-Based Chalkboard Paint, they made the perfect pair or Rainbow Paint Water-Based
Whiteboard Paint. For each layer of non-magnetic paint you add, the weaker the magnetic attraction will
be. We suggest No more than two coat of topcoat for maximum attraction.

Once finish, wait for 7 days and you can start to enjoy and have fun with your worked craft!

Helpful Hint
* Water-Based
* Easy Application
* Excellent Adhesion
* This product is Eco friendly, Child-safe, Non-toxic/Non-hazardous and Low VOC
* Rainbow Magnetic Paint can be applied to almost any smooth surfaces
* Rare earth magnets adhere best to the magnetic surface.

Safety Measures and Instructions
Keep container tightly closed. Keep out of reach of children. When applying paint, it is advisable to wear eyeprotection. In case of contact with eyes, rinse immediately with water and seek medical assistance. To removesplashes of paint from skin, use soap and water. Do not empty paint into drains or water courses. Dispose off any
paint waste in accordance with the appropriate Environmental Quality Regulation.
 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version